 |
Principle:
Use the wind energy as the motive power to revolve a permanent-magnet
generator at low speed
to generate alternate current, which is converted to direct current through
constant-voltage rectifier
under control and stored in the battery.The direct current transmitted
from the battery can be converted
to alternate current through inversion power source and then put into
use by linking to load.
COMPONENTS
1. WIND VANE
The product is used in the areas with wind and without
electricity such as: island,desert, plain,
beach, frontier defense, microwave communication, telephone transmitting
tower, forest observation
tower, maintenance station of oil delivery pipeline, lighting of expressway
ect. It is also used in the areas
with wind and with out electricity such as lighting for square, park,
the place of urban landscape
point, scenery resorts, lighting for highway, ecological in village ect.
according to require can connect
with nation electrified wire netting, use wind electricity with wind,
use net electricity without wind.
It can view and admire also utilize wind energy generate that it without
any cost, save energy resources
for country. It includes the following:
A .Generator:
1.Three phase rare earth permanent magnet. Operation is stable, efficiency
is
high.
2. Gyrator to be integrated to be together, increase intensity, and reduce
the
weight.
B. Rotor
1. Rotor: designed to be 3 blades, tail stream to be airfoil style. Lift-drag
ratio is
high, performance is superior.
2. Blades: Full glass fiber thread to be protruded in assembly line. Production
output is high, blade dynamic function is superior, tenacity is strong,
no distortion.
C. Tail
Forming is using mould extrusion. To connect with generator Gyrator wrist
, it will
be automatic horizontal furl when it is over speed.
D. Controller:
Controller is combined with wind generator.
Protection: Protection: Automatic tracking system to track and check battery
terminal voltage
1.Over-charge protection
2.Over-discharge protection
3.Over-load protection
4.Short-circuit protection
5.Thermal protection
|
2. HYBRID CONTROLLER
For Wind-solar Hybrid Road Lighting System
* Power Tracing Model Adopted for Maximum Effectiveness
& Energy
* Multi-circuit Feedback Controls
* Rechargeable w/ Electric Current Control Regulator LengtheningBattery
Lifespan
* Available for Time Control or Outdoor Receivable Light Sensors with
On/Off
of the Loads Automatically
* Total Solutions on Preventing from Reversed Connections Leadingto Burn
the
Solar Cell, Recharging with Exceeding or Insufficient Voltage, I/O with
Excee-
ding or Insufficient Voltage or Electric Current, Fall off on Over Speeding
etc.
* Own Operating Indicators light
3. INVERTER
An inverter system comprising:
An inverter connected between a DC power supply and a
load, which operates
to convert the DC power input from the DC power supply into AC power and
to supply the AC power to the load, the load and inverter being connected
at a node;
A switch connected between a main AC power system and
the load/inverter connection
node;
A first detector for detecting an open/closed state of
the switch;
A second detector for detecting a normal/abnormal state
of the main AC power system; and
A controller for controlling the operation of said inverter
based on the detected states
of the first and second detectors, wherein in a case where the inverter
is in operation
and the switch is in the closed state, the controller first causes the
inverter to stop operating
when the abnormal state of the main AC power system has been detected
by the second
detector, and then causes the inverter to restart operating when the open
state of the switch
has been detected by the first detector.
4. BATTERY BANK
5. SOLAR PANELS
6.BULBS
Lights up to 20 energy saving bulbs(40 watts)
4 - 6 hrs of lighting.
|
